Rainbird 5004PLPRSPC, 4" Body, 4" True Pop-up. Part Circle with Pressure Regulator
3/4" inlet port.
Includes set of nozzles, 8 standard & 4 low
angle
The next evolution in rotor performance.
The 5000 Plus series mid-range rotor compliments
Rain Bird's already strong Top-Adjust Rotor Family, by
offering greater durability, enhanced Rain Curtain
Nozzles and the superiority of Stream Control
technology. This innovative rotor has been
designed with the needs of the homeowner
in mind, while maintaining Rain Bird's
high quality standards... thus confirming
why top contractors worldwide chose
Rain Bird's 5000 Plus series rotor.
 |
Rain Curtain Nozzles
The industry’s only Rain Curtain Nozzles offer superior water distribution for green grass results.
Stream Control Technology
Flow shut-off device integrated into the top of the rotor
allows the flexibility to turn off the the individual rotor
rather than the whole zone.
Dual-Action Wiper Seal
Rain Bird's Dual-Action Wiper Seal creates two sealing points. These multiple sealing points protect the internals from debris and assure positive pop-up and retraction over the life of the rotor.
True 4" Pop-up (also available in 6" and 12")
Measured from the top of the case cover to the nozzle thus assuring that the spray pattern clears tall grass.
Reversing Full and Part-Circle Rotation
40°-360° arc adjustment from the top with only a flatblade
screwdriver.
Seal-A-Matic™ (SAM) (optional)
A check device prevents puddling and erosion caused by low-head drainage.
|
|
 The broad range of Rain Curtain nozzles is engineered to deliver optimum distribution uniformity across the entire radius range. The competitive advantage is that this uniformity compensates for varying environmental conditions, which in turn offers design flexibility and assures green grass results.
|
Features and Benefits
Faster maintenance with a new self-cleaning arc adjustment screw
The 5000/5000 Plus/5000 Plus PRS Series Rotors are available in 4”, 6”, 12”, Shrub, and Stainless Steel (5000 Plus/5000 Plus PRS 4” & 6” only) models
Standard rubber cover for extra protection. 5000 Plus/5000 Plus PRS feature a green cover while the 5000 features a black cover
Heavy-duty cover assembly for extra durability in residential or commercial applications
Rain Curtain™ Nozzles
The 5000 Plus features a Flow Shut-Off device to stop the flow of water to a particular head while the system is still in operation.
Slip clutch mechanism for quick adjustment on installation
Heavy-duty retract spring assures positive pop-down
Tree of nozzles including four low angle (Angle of Trajectory 10°) and eight standard angle Rain Curtain™ Nozzles (Angle of Trajectory 25°) provides 25 to 50 (7,6 to 15,2 m) distance of throw
Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25’ to 35’ (7,6 to 10,7 m) (see page 52)
Top-adjust arc adjustment requiring only a flat-blade screwdriver
Five-year trade warranty
40 - 360° arc rotation and reversing full circle rotation in one. (A nonreversing full circle only unit is also available)
Radius adjustment screw allows up to 25% radius reduction without changing nozzles
True 4” (10 cm), 6” (15,2 cm) and 12” (30,5 cm) pop-up (measured from the cover to the nozzle)
Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction
Reinforced flow path for additional side load strength
Additional O-rings and seals for extra protection in “gritty” water
Optional stainless steel riser helps deter vandalism on public turf areas (4” and 6” 5000 Plus/5000 Plus PRS only)
Optional pre-installed Rain Curtain™ nozzle on most popular nozzles
Optional Seal-A-Matic (SAM)™ check valve holds up to 7 feet (2,1 m) of elevation change, to prevent puddling and erosion caused by low head drainage
Optional non-potable purple cover for easy identification of reclaimed water
Operating Range
Precipitation rate: 0.20 to 1.01 inches per hour (5 to 26 mm/h)
Radius: 25 to 50 feet (7,6 to 15,2 m)
Radius may be reduced up to 25% with radius reduction screw
Pressure: 25-65 psi (1,7 to 4,5 bar)
Flow Rate: 0.73 to 9.63 gpm (4,2 to 36,6 l/m)
Specifications
3/4” (20/27) NPT female bottom threaded inlet
Reversing full and part circle adjustment 40° – 360°
Full circle only adjustment 360°
Dimensions
Pop-up height: Shrub; 4” (10,2 cm); 6” (15,2 cm); 12” (30,5 cm)
Overall body height: Shrub: 7 3/4” (19,7cm) 4”: 7 3/8” (18, 5 cm); 6”: 9 5/8” (24,5 cm); 12”: 16 7/8” (42,9 cm)
Exposed surface diameter: 1 5/8” (4,1 cm)
Note: Pop-up height measured from the cover to the nozzle. Overall body height is measured popped down
Optional PRS Feature
In-stem pressure regulator (PRS) reduces operating pressure to 45 psi (3,1 bar) for optimal nozzle performance
PRS saves water by:
- Eliminating head-to-head pressure variations
- Eliminating misting due to high pressure
- Improving nozzle distribution uniformity by operating the nozzle at optimum pressure
Maintenance-free design can be easily retrofitted into existing 5000/5000 Plus, T-Bird™ and Hunter® PGP™ (using UPG model) rotor cases without digging up the entire body
Pressure: 25-75 psi (1,7 to 5,2 bar)
