Home :: Irrigation :: Sprinkler Controllers :: Hunter Sprinkler Controllers :: Hunter ICC Controllers :: Hunter ICM-400 4-Station Expansion Module for ICC-800 and I2C-800 Controllers

Hunter ICM-400 4-Station Expansion Module for ICC-800 and I2C-800 Controllers

Hunter ICM-400 4-Station Expansion Module for ICC-800 and I2C-800 Controllers
 
(0 reviews)  

SKU
ICM-400
Retail price:
$59.99
Our price:
$54.99
 
Shipping
Qty

Hunter ICM-400 4-Station Expansion Module for ICC-800 and I2C-800 Controllers.

Module Only - Used as an add-on to your existing controller.

ICM modules consist of 4, 8 or 22 stations each; allowing you to build a controller more closely matching the total number of stations desired.

The ICC and I2C controllers are supplied with one factory-installed station module for up to 8 stations. Additional modules are purchased separately. Additional modules may be added in increments of 4 or 8 stations for the original ICC controller to a maximum of 32 stations with a plastic cabinet and a maximum of 48 stations with a metal or stainless steel cabinet. A 22 station add-on module can be used to expand the I2C controller's station capability to a maximum of 38 stations with plastic cabinet and maximum of 54 stations with metal or stainless steel cabinet.

ICM modules now have a Positive-Lock™ feature that fastens the module securely into the ICC (The Positive-Lock feature was added to ICM modules date coded 12/02 or newer - the modules will also work with older ICC units). Rotating the Positive-Lock lever makes it easy to lock or unlock the module(s). Follow these simple steps:

 

  1. When installing additional modules, you will need to turn AC power off at the controller.
  2. Rotate the Positive-Lock lever on the module clockwise to the unlock position.
  3. The module needs to be inserted into the next sequential position in the back of the controller. Note: If you are using a 4-station module, it must be in the last sequential position on the controller. Example: For an area that needs 12 stations, the first module will be an 8-station and the 4-station module will be below it. Note that station numbers are identified on the back panel, not the individual modules.
  4. Insert the module into the controller’s expansion slot with the tab end first (opposite side with the Positive-Lock lever).
  5. Push the module into the expansion slot and rotate the lever counter-clockwise (until the lever is flush with the side the module) to lock the module in place.
  6. Restore power to the controller. Turning the power off and on again permits the microprocessor to recognize the newly installed modules. You can also use the reset button on the back of the front panel to reset the microprocessor to recognize additional modules.

 

For use with Hunter ICC-800 and I2C-800 controllers only.

: *
: *
: *
Type the characters you see in the picture:


*
Hunter PGJ-04 4" Pop-Up Sprinkler Rotor
Hunter PGJ-04 4" Pop-Up Sprinkler Rotor
$9.98
Hunter ICM-800 8-Station Expansion Module for ICC-800 and I2C-800 Controllers
$104.01
Number 10LA Nozzle for Rain Bird Maxi-Paw Sprinkler Rotor
Number 10LA Nozzle for Rain Bird Maxi-Paw Sprinkler Rotor
$0.79
Hunter ICM-600 6-Station Plug-In Expansion Module for IC-600 Series Controllers
$59.99
Hunter IC-600 6-Station controller, indoor/outdoor, plastic or metal cabinet
$295.66
Hunter 124705, Hunter I-CORE Front Panel
Hunter 124705, Hunter I-CORE Front Panel
$112.99
Hunter I2C-800M 8-Station Outdoor Sprinkler Controller (Metal Cabinet)
Hunter I2C-800M 8-Station Outdoor Sprinkler Controller (Metal Cabinet)
$449.01
Rain Bird XFCV-09-12-500 XFCV Dripline 0.9gph @ 12 inch Spacing (500 ft. Roll)
$179.99
There have been no reviews

Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!