Rain Bird 100-DVF-SS 1" Plastic Control Valve w/Flow Control (SxS)

100-DVF-SS 1" Sprinkler Control Valve With Flow Control

Slip x Slip (SS) Configuration for Low Cost, Solvent-Weld Installations

Primary Applications:

Economical irrigation valve for residential and light commercial applications where flow control is desired.

Features and Benefits:

• Double-filtered pilot-flow design for maximum reliability.
• Balanced-pressure diaphragm for long life.
• External bleed to manually flush system of dirt and debris during installation and system start-up.
• Internal bleed for spray-free manual operation.
• Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter.
• Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
• Operates in low-flow and Xerigation (drip) applications when the RBY filter is installed upstream.
• 1.25" (3,2 cm) stainless steel phillips head screws.
• Accepts latching solenoid for use with Rain Bird battery-operated controllers (TBOS System).
• Quick and convenient assembly with Rain Bird's MS-DV/DVF Valve Union Manifold kits.
• Unique, easy-to-turn patented pressure assisted flow control mechanism.
• Available as:
  • 1" (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations
  • 1" (26/34) Angle (A) configurations for flexible installations especially when submains are deep
  • 1" (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding
  • 1" (26/34) Male-by-Barb (MB) and 1" Male-by-1.25" Barb male thread inlet by barb outlet configuration for installation with poly pipe.

Click To Enlarge

 

Models:

• 100-DVF: 1" (26/34)
• 100-DVF-SS: 1" (26/34)
• 100-DVF-A: 1" (26/34)
• 100-DVF-MM: 1" (26/34)
• 100-DVF-MB: 1" (26/34)
• 100-DVF-UU: 1" (26/34)
• 100-DVF-UB: 1" (26/34)
  
  Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec. (2,3 m/s) in order to reduce the effects of water hammer.

Specifications:

• Pressure: 15 to 150 psi (1,0 to 10,4 bar)
• 100-DVF Flow (non-union): 0.2 to 40 gpm (0,75 m3/h; 0,21 l/s); for flows below 3 gpm or any Xerigation application, use RBY-100-200MX Filter installed upstream.
• Temperature: Up to 110° F (43° C)
• Ambient air temperature: Up to 125° F (52° C)
• 24 VAC 50/60 Hz (cycles per second) solenoid power requirement
• 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current
• Solenoid coil resistance: 38 Ohms

Dimensions:

• Height: 5 3/5" (14,2 cm)
• Height (Angle): 5 1/2" (14 cm)
• Width: 3 1/3" (8,4 cm)
• Length: 4 3/8" (11,1 cm)
• Length (Angle): 3 3/4" (9,5 cm)
• Length (MM): 5 3/8" (13,6 cm)
• Length (MB): 5 3/4" (14,6 cm)
• Length (UU): 5 7/8" (14,9 cm)
• Length (UB): 6" (15,2 cm)

Additional Information:

Technical Specifications
(PDF: 462 KB)

Installation Manual
(PDF: 397 KB)