Home :: Irrigation :: Backflow Prevention Devices :: Febco :: Pressure Vacuum Breakers :: Febco 765-200 2" Pressure Vacuum Breaker

Febco 765-200 2" Pressure Vacuum Breaker

Febco 765-200 2" Pressure Vacuum Breaker
 
(0 reviews)  

SKU
765-200
Our price:
$680.99
 

( This item qualifies for FREE SHIPPING!!! )
Qty Out of stock
Febco 2" Pressure Vacuum Breaker - Model # 765-200

Operation
The Febco 765 PVB is designed to be installed to provide protection against backsiphonage of toxic or non-toxic liquids. It consists of a spring loaded check valve which closes tightly when the pressure in the assembly drops below 1 PSI or when zero flow occurs, plus, an air relief valve that opens to break a siphon when the pressure in the assembly drops to 1 PSI.

Typical Applications
PVB - Pressure Vacuum Breaker assemblies are used to protect against health hazard and non health hazard backsiphonage conditions in industrial plants, cooling towers, laboratories, laundries, swimming pools and lawn sprinkler systems.

Features

  • Febco 765 Pressure Vacuum Breakers are available in sizes from 1/2 in. through 2 in. Buyer please note - The one size represented for sale on this page is size 2 inch IPS.
  • All bronze body for durability.
  • Design includes one check valve and one air opening port in one assembly.
  • Lightweight poppet seals air opening under minimum flow conditions.
  • Simple service procedures, All internal parts serviceable in line from the top of the unit.
  • Designed for minimum head loss.
  • Engineered plastic bonnet protects valve bodies from freeze damage.

    Installation Specifications
    Febco 765 Pressure Vacuum Breaker assemblies should be installed at least 12 inches above the highest piping outlet and downstream of the assembly to preclude backpressure. In a sprinkler system that means the Febco 765 Pressure Vacuum Breaker must be installed 12 inches above the highest head in the irrigation system.

    Febco 765 PVB assemblies should be installed so they are easily accessible for maintenance, periodic testing, and where discharge will not be objectionable. They should be protected from freezing. If the assemblies are subject to freezing temperatures, the freeze protection procedures outlines in the service manual that is included with the Febco 765 Pressure Vacuum Breaker must be followed. Assemblies must not be installed where backpressure could occur.

    The discharge pressure of the Febco 765 pressure vacuum breaker shall be maintained above 3.0 PSI on 1/2 in though 1 1/4 in sizes and 5.0 PSI on 1 1/2in and 2 in sizes to insure seating of the spring loaded air inlet poppet.

    Thermal expansion of water and / or water hammer down stream of the backflow presenter can cause pressure increases. Excessive pressure should be eliminated to avoid possible damage to the system and assembly.

    Typical Specifications
    Pressure Vacuum Breaker assemblies shall be installed to withstand pressure for long periods and to prevent backflow of contaminated water into the potable water system in backsiphonage conditions. The Pressure Vacuum Breaker assembly shall consist of a single spring loaded check valve which closes tightly when water flow through the assembly drops to 1 PSI.

    The assembly shall include two resilient seated shut-offs and two resilient seated test cocks, considered integral to the assembly. Assemblies must be factory backflow tested. The check valve and air inlet valve must be constructed to allow in-line servicing of the assembly. The valve body shall be constructed of bronze. The check, poppet and bonnet assembly shall be constructed of engineered plastic to protect the valve body from damage in the event of freezing.

    Pressure Vacuum Breaker assemblies shall be installed a minimum of 12 inches above the highest downstream outlet, and the highest point in the downstream piping. The assembly shall be rated to 150 PSI working pressure and water temperature from 32 degrees F. to 140 degrees F. The assembly shall meet the specifications of the USC* approval.

    Pressure Vacuum Breaker shall be Febco 765 or prior approved equal.

    Agency Compliance
    The Febco 765 Pressure Vacuum Breaker is approved the following:

  • * USC - The Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California. (Valves must be supplied with resilient seated ball valve shut-off's and test cocks for USC's approval to be effective.)
  • ASSE Listed Standard 1020.
  • CAN/CSA Certified - B64.1.2
  • IAPMO Listed


    Febco Installation & Repair Manuals
    Models
    Manuals
    Adobe Acrobat Reader Required For Viewing. Download your FREE copy of Adobe Acrobat Reader HERE
  • : *
    : *
    : *
    Type the characters you see in the picture:


    *
    Febco 905-047 1/2" - 3/4" Bonnet Assembly Kit (Model 765)
    Febco 905-047 1/2" - 3/4" Bonnet Assembly Kit (Model 765)
    $36.50
    Netafim EDTUBETEE 1/4" Barb Tee - Bag of 25
    Netafim EDTUBETEE 1/4" Barb Tee - Bag of 25
    $7.00
    Rain Bird 1300A-F Adjustable Full-Circle Bubbler
    Rain Bird 1300A-F Adjustable Full-Circle Bubbler
    $1.99
    Hunter 429600 ICC-800 Replacement Part - Front Panel
    Hunter 429600 ICC-800 Replacement Part - Front Panel
    $225.00
    Regency 12 awg 2 Strand Low Voltage Wire (250 ft. roll)
    Regency 12 awg 2 Strand Low Voltage Wire (250 ft. roll)
    $189.99
    Hunter 104000 PGP® Retraction Spring (ADJ)
    Hunter 104000 PGP® Retraction Spring (ADJ)
    $2.99
    Regency 18 awg Blue Single Conductor Irrigation Wire (500 ft. roll)
    Regency 18 awg Blue Single Conductor Irrigation Wire (500 ft. roll)
    $54.99
    Rain Bird TLF-TEE-0600 1/2in twist lock tee
    Rain Bird TLF-TEE-0600 1/2in twist lock tee
    $3.09
    Rain Bird XBS940G500 3/4" tubing, 500 ft coil, green stripe
    Rain Bird XBS940G500 3/4" tubing, 500 ft coil, green stripe
    $149.01
    There have been no reviews

    Only those who bought this product are allowed to add review
    If you've already bought this product, please sign in and add your own review!