Blazing Products Large Wire Connectors, Model # LV9500. (Sold in bags of 12)

Snap-Locking Waterproof Connectors with Pre-Filled Silicone

(Formerly known as SNAPLOC™ Low-Voltage Wire Connectors.)

• Best low-voltage connections for landscape lighting, irrigation & more...
• 100% Waterproof
• Quick, compact and easy!

Blazing Wire Connectors are the low-voltage wire connectors designed for the professional irrigation and landscape lighting contractor. Unlike twist-on connectors, you never have to doubt the connection.

Superior Performance When it Counts

• Lawn Irrigation Systems
• Low-Voltage Landscape Lighting
• Security Systems
• Telephone Wire Splices
• Boats, Recreational Vehicles
• Heavy Construction Equipment

Snap-Locking connectors eliminate common install problems:

Locking - Never loosens or dangles off wires Foolproof - Never fails to grab the wires Easy - Compact 5-second installation No Mess - Silicone encapsulates connection and will not melt out No Tunneling Effect - No channel for moisture to follow into the connection Vibration Proof - Connection stays secure

Locks Tight with Double O-Ring Seals

Just squeeze and lock to hydraulically pump and pack waterproofing silicone. Pre-filled silicone fully encapsulates all bare wires, closing all entryways against moisture and corrosion. A double O-ring seal bars water from creeping in, and latches lock the connector around the wires. Blazing Wire Connectors™ are vibration-proof and never dangle off the wires.

Say Goodbye to Traditional Connector Problems

Are you familiar with the traditional problems of "waterproof" low-voltage wiring?

• When you go back to a valve box, do you find connectors dangling off the ends of the wires?
• When installing, do you twist and twist and the twist-on connectors still don't grab the wires?
• Do you regularly have to pull out the wires, removing the silicone with them?
• Do you overtwist and the wires break off inside?
• Do you have to turn your connector upside down so it doesn't collect water?
• Is it too messy if you ever have to get back into the connection?

Blazing Wire Connectors™ solve all of these problems with their patented design.

Eliminate Expensive Call-Backs Because of Faulty Wiring

Professionals generally check the wiring first when examining a faulty sprinkler system because traditional connectors regularly fail to maintain the connection and protect it from moisture and corrosion. Blazing Wire Connectors™ are the solution - They're the economical connectors that make the connection first and seal it second.

"A poor wire connection will always lead to an expensive and time-consuming call back. A call back takes time and money out of the contractor's pocket... Unlike ordinary twist-on wire connectors that traditionally cause gaps into which moisture can enter and accumulate, Snaploc wire connectors are 100-percent water resistant."     --Tech Times, Official quarterly of Irrigator Technical Training School, CA ("Snaploc...Innovation at Its Best!", Fall 2001)

The LV 9000 and LV 9500 wire connectors can be used with both solid and stranded wires.

Blazing Wire Connectors™ applications include:

• Lawn Irrigation Systems
• Low-Voltage Landscape Lighting
• Security Systems
• Telephone Wire Splices
• Boats, Recreational Vehicles
• Heavy Construction Equipment

LV 9000 / 901-8 (small)

• WIRE SIZES: Minimum 2 #24 gauge wires; Maximum 5 #18
• APPLICATION: Maximum 30 Volts / 10 Amps. Copper and/or aluminum wire, solid or stranded
• SEALANT TEMPERATURE: -40°F to 400°F
• WARNING! Not for high-voltage connections.

LV 9500 / 951-4 (large)

Designed specifically for landscape lighting, golf courses, and larger irrigation wiring.

• WIRE SIZES: Minimum 2 #18 gauge wires; Maximum 3 #10 & 1 #18
• APPLICATION: Maximum 30 Volts Copper and/or aluminum wire, solid or stranded
• SEALANT TEMPERATURE: -40°F to 400°F
• WARNING! Not for high-voltage connections.