Rain Bird 5004PLPCSAM, 4" True Pop-up. Part Circle with Seal-A-Matic Check Valve

Includes set of nozzles, 8 standard & 4 low angle

The next evolution in rotor performance.

The 5000 Plus series mid-range rotor compliments Rain Bird's already strong Top-Adjust Rotor Family, by offering greater durability, enhanced Rain Curtain Nozzles and the superiority of Stream Control technology. This innovative rotor has been designed with the needs of the homeowner in mind, while maintaining Rain Bird's high quality standards... thus confirming why top contractors worldwide chose Rain Bird's 5000 Plus series rotor.

Rain Curtain Nozzles The industry’s only Rain Curtain Nozzles offer superior water distribution for green grass results. Stream Control Technology Flow shut-off device integrated into the top of the rotor allows the flexibility to turn off the the individual rotor rather than the whole zone. Dual-Action Wiper Seal Rain Bird's Dual-Action Wiper Seal creates two sealing points. These multiple sealing points protect the internals from debris and assure positive pop-up and retraction over the life of the rotor. True 4" Pop-up (also available in 6" and 12") Measured from the top of the case cover to the nozzle thus assuring that the spray pattern clears tall grass. Reversing Full and Part-Circle Rotation 40°-360° arc adjustment from the top with only a flatblade screwdriver. Seal-A-Matic™ (SAM) (optional) A check device prevents puddling and erosion caused by low-head drainage.

Features and Benefits

• Faster maintenance with a new self-cleaning arc adjustment screw
• The 5000/5000 Plus/5000 Plus PRS Series Rotors are available in 4”, 6”, 12”, Shrub, and Stainless Steel (5000 Plus/5000 Plus PRS 4” & 6” only) models
• Standard rubber cover for extra protection. 5000 Plus/5000 Plus PRS feature a green cover while the 5000 features a black cover
• Heavy-duty cover assembly for extra durability in residential or commercial applications
• Rain Curtain™ Nozzles
• The 5000 Plus features a Flow Shut-Off device to stop the flow of water to a particular head while the system is still in operation.
• Slip clutch mechanism for quick adjustment on installation
• Heavy-duty retract spring assures positive pop-down
• Tree of nozzles including four low angle (Angle of Trajectory 10°) and eight standard angle Rain Curtain™ Nozzles (Angle of Trajectory 25°) provides 25 to 50 (7,6 to 15,2 m) distance of throw
• Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25’ to 35’ (7,6 to 10,7 m) (see page 52)
• Top-adjust arc adjustment requiring only a flat-blade screwdriver
• Five-year trade warranty
• 40 - 360° arc rotation and reversing full circle rotation in one. (A nonreversing full circle only unit is also available)
• Radius adjustment screw allows up to 25% radius reduction without changing nozzles
• True 4” (10 cm), 6” (15,2 cm) and 12” (30,5 cm) pop-up (measured from the cover to the nozzle)
• Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction
• Reinforced flow path for additional side load strength
• Additional O-rings and seals for extra protection in “gritty” water
• Optional stainless steel riser helps deter vandalism on public turf areas (4” and 6” 5000 Plus/5000 Plus PRS only)
• Optional pre-installed Rain Curtain™ nozzle on most popular nozzles
• Optional Seal-A-Matic (SAM)™ check valve holds up to 7 feet (2,1 m) of elevation change, to prevent puddling and erosion caused by low head drainage
• Optional non-potable purple cover for easy identification of reclaimed water

  Operating Range

• Precipitation rate: 0.20 to 1.01 inches per hour (5 to 26 mm/h)
• Radius: 25 to 50 feet (7,6 to 15,2 m)
• Radius may be reduced up to 25% with radius reduction screw
• Pressure: 25-65 psi (1,7 to 4,5 bar)
• Flow Rate: 0.73 to 9.63 gpm (4,2 to 36,6 l/m)

  Specifications

• 3/4” (20/27) NPT female bottom threaded inlet
• Reversing full and part circle adjustment 40° – 360°
• Full circle only adjustment 360°

  Dimensions

• Pop-up height: Shrub; 4” (10,2 cm); 6” (15,2 cm); 12” (30,5 cm)
• Overall body height: Shrub: 7 3/4” (19,7cm) 4”: 7 3/8” (18, 5 cm); 6”: 9 5/8” (24,5 cm); 12”: 16 7/8” (42,9 cm)
• Exposed surface diameter: 1 5/8” (4,1 cm) Note: Pop-up height measured from the cover to the nozzle. Overall body height is measured popped down

  Optional PRS Feature

• In-stem pressure regulator (PRS) reduces operating pressure to 45 psi (3,1 bar) for optimal nozzle performance
• PRS saves water by:
  - Eliminating head-to-head pressure variations
  - Eliminating misting due to high pressure
  - Improving nozzle distribution uniformity by operating the nozzle at optimum pressure
• Maintenance-free design can be easily retrofitted into existing 5000/5000 Plus, T-Bird™ and Hunter® PGP™ (using UPG model) rotor cases without digging up the entire body
• Pressure: 25-75 psi (1,7 to 5,2 bar)