Universal remote ready: pre-installed connectors for addition of remote products.
Heavy-duty transformer for simultaneous operation of up to nine 24 VAC, 7VA solenoids.
Battery-programmable controller allows for programming prior to installation.
Stand-Alone Operating Specifications
Station timing: A, B, C, D: 0 to 2 hours in
1-minute increments; 2 to 12 hours in
10-minute increments
Automatic starts: 32 starts total, eight per program per day
Programming schedule: 1. ODD day watering per program; 2. EVEN day watering per program 3. CYCLICAL (1 to 99 days, variable per program; 4. Custom day-of-the-week by program
Test program: Variable 1 to 99 minutes
Operating Specification
Requires a CCU to connect to Maxicom2 central controller
Requires a TWI to connect to SiteControl
central controller
MAXILink™ models have 2 sensor inputs - no decoders required
40 station models require 2 CCU channels
Electrical
Input required: 117 VAC ± 10%, 60Hz
(International models: 230 VAC± 10%, 50Hz)
Output 26.5 VAC, 2.5A
Station load capacity: Up to two 24 VAC, 7VA solenoid valves per station (up to 4 stations operating simultaneously) plus a master valve or pump start relay
Diagnostic circuit breaker skips and indicates stations with overloaded circuits
Battery backup: 9VDC, NiCad rechargeable for programming under battery power and for maintaining active program-in-progress during a power outage Heavy-duty electrical surge protection