Vista 5275 In-Ground and Well Light 12 Volt Series (50W) - Solid Trim with Glare Shield

Vista 5275 In-Ground and Well Light 12 Volt Series (50W) - Solid Trim with Glare Shield

This ruggedly designed low voltage in-ground fixture with a solid brass or stainless steel trim ring and glare shield is constructed of injection-molded, fiber-reinforced composite for strength and high UV stability and is warranted for ten years against corrosion. The convex lens is clear, high temperature tempered soda-lime glass for high-impact resistance, furnished with silicone molded gasket for a watertight seal. Also, an adjustable lamp bracket provides +/-25° of tilt for precise beam control and locks into place preventing any disruption of lamp position during maintenance. The Vista 5275 is shipped with a standard 20W MR16 flood lamp, unless otherwise specified.

Specifications:

Manufacturer: Vista Lighting
Bulb: Tungsten Halogen MR-16 LN-20 BAB/FG Standard (20W)
Max Wattage: 50W Maximum Wattage
Lead Wire Provided: Prewired with a three-foot pigtail of 18-2 direct-burial cable and underground connectors for a secure connection to the supply cable.
Body Material: Injection-molded, glass-reinforced Ryton R4 composite for strength and high UV stability.
Optic/Aiming: Adjustable lamp bracket provides up to +/-25° of tilt as well as 360° rotation of the housing for precise beam control. Lamp bracket can be locked into place to prevent disrupting lamp position when relamping. Models with housing brackets within the ABS wells provide up to +/-45° of tilt in addition to the lamp bracket.
Lens Cover: Precision CNC machined solid brass or solid stainless steel fitted to the housing with a silicone o-ring gasket, providing a superior weather-tight seal.
Lens: Clear, tempered, shock & heat-resistant, soda-lime glass lens- crowned (convex) to promote water runoff. Optical effect lenses are available below.

Full Customization:

Select Your Mounting Hardware:

• In-grade Mount (GW)
• In-grade Conduit Mount (CM) - Two 3/4" NPT Inlets on the Bottom
• Concrete Mounting Kit (JBCP-150)

Select Your Lens:

Crowned Cool Blue Lens (CBL)	Crowned Frosted Lens (CFR)	Flat Spread Lens (SL)
Flat Dark Blue Lens (DBL)	Flat Dark Green Lens (GL)	Flat Red Lens (RL)
Flat Amber Lens (YL)	Honeycomb Louver (HL)

Select Your Lens Cover:

Natural Solid Brass Trim (CSN)

Natural Solid Brass with Olde Brass Finish (BSO)

Stainless Steel Trim (SS)

Go Green with LEDs (Bulb Upgrade):

Reduced energy consumption of up to 80% versus traditional lamps. Dramatically lowers power bills, reduces transformer size up to 80%.

Simplified installation. More fixtures per cable reduces complexity of installations and wire costs. Reduces complex voltage drop calculations.

Long life. Reduces maintenance requirements, ideal for fixtures in hard-to-reach areas. “Fit and forget”. Up to 10 year life in typical field conditions - 50,000 Hour Rate Life.

Safety. LED generates little heat, so fixture lenses stay cool to the touch, providing an extra margin of safety in both low-voltage and line-voltage applications.

Meet green building requirements. Recommended as a proven method to reduce energy use, Vista fixtures help you achieve green building goals.

Vista has been a consistent leader in LED technology and offers a broad array of LED fixtures for low-voltage and line-voltage landscape lighting applications. LED fixtures from Vista provide excellent light output, low power consumption, low heat generation and durability unmatched by any other lighting product.

While more expensive than traditional fixtures up front, LED fixtures have a fast payback thanks to lower operating and maintenance costs. LEDs incorporate no filament, so they have much longer life than traditional incandescent lamps. Their solid-state designs are not effected by ambient temperatures and tolerate harsh environments.

Reference Documents:

Vista Homeowners Brochure (PDF: 917 KB)	Vista 5275 Specifications (PDF: 278 KB)
Vista 5275 Installation Instructions (PDF: 278 KB)	Vista Finishes Brochure (PDF: 489 KB)

All Vista products are made in the USA and are not made until you order them. This gives you maximum customization of your lighting without having to worry about long delays.

Since all orders are made to order, please allow about a week before shipment, unless expedited production is selected below.

Your name:	*
Your e-mail:	*
Recipient's email:	*
Send to friend

Product rating
Voting	Select your rating... Excellent! Very good Good Fair Poor Rate It!
Customer Reviews
There have been no reviews for this product.
Add your review here
Your name: * Your message: * Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page): Add review