Provides fast; easy; one-step installation of Xeri-Bug emitters; PC Modules and 1/4" barbed insert fittings directly into 1/2" or 3/4" drip tubing such as Xeri-Tube (XT-700). Multi-function tool simplifies adding or removing Spot Watering Emitters, 1/4" Fittings and Tubing Plugs
Step 1
Place the Spot Watering Emitter on end of tool. Press barbed point into side wall of 1/2" Tubing. [The Emitter Tool also works with 1/4" Barbed Couplings and with 1/4" Barbed Tees.]
Step 2
Pull tool away, leaving the Spot Watering Emitter embedded in tubing.
Step 3
Push 1/4" tubing onto the Spot Watering Emitter.
Step 4
To remove Spot Watering Emitters, use side of tool.
Step 5
1/4" Tubing Plugs can be used to seal holes in 1/2" tubing. Use bottom of Emitter Tool to insert these plugs.
