Rain Bird 100PGA 1" Plastic Globe/Angle Valve
(Female x Female Threaded)
For Residential And Light Commercial Applications.
Plastic Industrial Irrigation Valves
Plastic globe/angle valve for residential/light
commercial irrigation applications. The PGA Series offers
versatility
at an affordable price.
Features and Benefits:
Globe and angle configuration for flexibility in design
and installation.
Rugged PVC construction for reliable operation.
Normally closed, forward flow design.
Double-filtered pilot flow to resist debris and clogging
of solenoid ports.
Slow closing to prevent water hammer and subsequent system
damage.
Manual internal bleed operates the valve without allowing
water into the valve box. Allows pressure regulator to be
adjusted without turning the valve on at the controller.
One-piece solenoid design with captured plunger and spring
for easy servicing. Prevents loss of parts during field
service.
Non-rising flow control handle adjusts water flow as needed.
Accommodates optional, field-installed PRS-D pressure
regulating module to ensure optimum sprinkler performance.
Accepts latching solenoid for use with Rain Bird battery-operated
controllers.
Optional purple flow control handle for non-potable water
applications PGA-NP-HAN1 (1" and 1 1/2"); PGA-NP-HAN2
(2").
Models:
100-PGA: 1" (26/34)
150-PGA: 1 1/2" (40/49)
200-PGA: 2" (50/60)
All models available with BSP threads.
- Rain Bird recommends flow rates in the supply line not
to exceed 7.5 feet/second (2,3 m/s) in order to reduce the
effects of water hammer.
- For flows below 5 GPM (1 m3/h; 32 l/s), Rain Bird recommends
use of upstream filtration to prevent debris from collecting
below the diaphragm.
- For flows below 10 GPM (2 m3/h; 63 l/s) Rain Bird recommends
the flow control stem be turned down two full turns from
the fully open position.
Specifications:
Pressure: 15 to 150 psi (1,0 to 10,4 bar)
Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h;
0,13 to 9,44 l/s)
Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32
to 9,44 l/s)
Temperature: Up to 110° F (43° C)
24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
0.41 A (9.8 VA) inrush current; 0.28 A (6.7 VA) holding
current
Solenoid coil resistance: 24 Ohms, nominal
Dimensions:
(H x L x W)
100-PGA:
7 1/4" x 5 1/2" x 3 1/4"
(18,4 cm) x (14,0 cm) x (8,3 cm)
150-PGA:
8" x 6 3/4" x 3 1/2"
(20,3 cm) x (17,2 cm) x (8,9 cm)
200-PGA:
10" x 7 3/4" x 5"
(25,4 cm) x (23,5 cm) x (12,7 cm)
Note: The PRS-D option adds 2" (5,1
cm) to the valve height.
 |
|
