Rain Bird 100PESB 1" Electric Valve For Commercial Applications w/Flow Control And Scrubber For Dirty Water Irrigation Systems.
Plastic Industrial Irrigation Valves
Click Here To Enlarge
Industrial-strength glass-filled nylon
globe valve with self-cleaning scrubber and stainless steel
screen for reliable performance in dirty water irrigation
applications. The PESB series incorporates patented scrubber
technology.
Features and Benefits:
Durable glass-filled nylon construction for long life
and reliable performance.
Globe configuration.
Normally closed, forward flow design.
Slow closing to prevent water hammer and subsequent system
damage.
One-piece solenoid design with captured plunger and spring
for easy servicing. Prevents loss of parts during field
service.
Flow control handle adjusts water flows as needed.
Manual internal bleed operates the valve without allowing
water into the valve box; allows pressure regulator to be
adjusted without turning the valve on at the controller
first.
Manual external bleed permits flushing debris from the
system. Recommended for system start up and after repairs
Low flow operating capability for a wide range of applications.
Stainless steel studs molded into the body. Bonnet can be
attached and removed more easily and more often without
damaging threads.
Nylon scrubber scrapes a stainless steel screen to clean
and break down grit and plant material. Prevents debris
build-up and clogging.
Models:
100-PESB: 1" (26/34)
150-PESB: 1 1/2" (40/49)
200-PESB: 2" (50/60)
All models available with BSP threads
Specifications:
Pressure: 20 to 200 psi (1,4 to 13,8 bar)
Flow without PRS-D option: 0.25 to 200 GPM (0,06 to 45,40
m3/h; 0,02 to 12,60 l/s)
Flow with PRS-D option: 5 to 200 GPM (1,14 to 45,40 m3/h;
0,32 to 12,60 l/s)
Temperature: Up to 150° F (66° C)
24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
0.41 A (9.8 VA) inrush current; 0.28 A (6.7VA) holding current
Solenoid coil resistance: 24 Ohms, nominal
Options:
Accommodates field installed PRS-D pressure regulating
module to ensure optimum sprinkler performance.
Accepts latching solenoid for use with Rain Bird battery-operated
controllers up to 150 psi (10,3 bar).
Optional purple flow control handle for non-potable water
applications PEB-NP-HAN1 (1"); PEB-NP-HAN2 (1 1/2"
and 2").
Dimensions:
100-PESB: 6 1/2" x 4" x 4" (16,5 cm x 10,2
cm x 10,2 cm)
150-PESB: 8" x 6" x 6" (20,3 x 15,2 x 15,2
cm)
200-PESB: 8" x 6" x 6" (20,3 x 15,2 x 15,2
cm)
Note: The PRS-D option adds 2"
(5,1cm) to the valve height.
Recommendations:
Rain Bird recommends flow rates in the supply line not
to exceed 7.5 ft./sec. (2,3 m/s) in order to reduce the
effects of water hammer.
For flows below 5 GPM (1,14 m3/h; 0,32 l/s), Rain Bird
recommends use of upstream filtration to prevent debris
from collecting below the diaphragm.
For flows below 10 GPM (2,27 m3/h; 0,63 l/s) Rain Bird
recommends the flow control stem be turned down two full
turns from the fully open position.
|
|
