Rain Bird 100PEB 1" Electric Valve For Commercial Applications
Plastic Industrial Irrigation Valves
Click Here To Enlarge
Primary Applications:
Industrial-strength glass-filled nylon
globe valve for commercial irrigation applications. The
PEB Series is
our most durable plastic irrigation valve.
Features and Benefits:
Durable glass-filled nylon construction with nylon-reinforced
rubber diaphragm for long life and reliable performance.
Globe configuration.
Normally closed, forward flow design.
Slow closing to prevent water hammer and subsequent system
damage.
Low flow capability for a wide range of applications.
One-piece solenoid design with captured plunger and spring
for easy servicing. Prevents loss of parts during field
service.
Flow control handle adjusts water flows as needed.
Manual internal bleed manually operates the valve without
allowing water into the valve box; allows pressure regulator
to be adjusted without turning the valve on at the controller
first.
Manual external bleed permits flushing debris from the
system. Recommended for system start up and after repairs.
Stainless steel studs molded into the body. Bonnet can
be attached and removed more easily and more often without
damaging threads.
Models:
100-PEB: 1" (26/34)
150-PEB: 1 1/2" (40/49)
200-PEB: 2" (50/60)
All models available with BSP threads
- Rain Bird recommends flow rates in the supply line not
to exceed 7.5 feet/second (2,3 m/s) in order to reduce the
effects of water hammer.
- For flows below 5 GPM (1,14 m3/h; 0,32 l/s), Rain Bird
recommends use of upstream filtration to prevent debris
from collecting below the diaphragm.
- For flows below 10 GPM (2,27 m3/h; 0,63 l/s) Rain Bird
recommends the flow control stem be turned down two full
turns from the fully open position.
Specifications:
Pressure: 20 to 200 psi (1,4 to 13,8 bar)
Flow without PRS-D option: 0.25 to 200 GPM
(0,06 to 45 m3/h; 0,02 to 12,60 l/s)
Flow with PRS-D option: 5 to 200 GPM
(1,14 to 45 m3/h; 0,32 to 12,60 l/s)
Temperature: Up to 150° F (66° C)
24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
0.41 A (9.8 VA) inrush current; 0.28 A (6.7 VA) holding
current
Solenoid coil resistance: 24 Ohms, nominal
Options:
Accommodates optional, field-installed PRS-D pressure
regulating module to ensure optimum sprinkler performance.
Accepts latching solenoid for use with Rain Bird battery-operated
controllers.
Optional purple flow control handle for non-potable water
applications PEB-NP-HAN1 (1"); PEB-NP-HAN2 (1 1/2"
and 2").
Dimensions:
100-PEB: 6 1/2" x 4" x 4"
(16,5 cm) x (10,2 cm) x (10,2 cm)
150-PEB: 8" x 6" x 6"
(20,3 cm) x (15,2 cm) x (15,2 cm)
200-PEB: 8" x 6" x 6"
(20,3 cm) x (15,2 cm) x (15,2 cm)
Note: The PRS-D option adds 2" (5,1
cm) to the valve height. |
|
