Hunter HPV-100-G 1" Plastic Globe Valve (S x S)

A heavy-duty residential valve made specifically to handle demanding situations.

Built to work. Built to last. The Hunter HPV is a valve that’s both. Because this is a valve with every feature you could ask for to attain long-lasting, heavy-duty performance. Rigid internal support to prevent stress failure in high pressure situations. A unique porting system with a superior ability to filter dirty water that also closes slowly to suppress water hammer. Low-flow capability for effective drip applications. A captive diaphragm, solenoid plunger, and bonnet screws, so lost parts are never a problem.

There’s even a flow control option that assures efficient operation when accurate flow management is required. For residential and light commercial applications, the Hunter HPV plastic valve is built to take whatever your site is dishing out.

It's a Dirty Job, but Hunter Valves Can Do It

Hunter valves are specifi cally engineered to handle conditions where clean water is not an option. When you’re drawing from a well, lake, reservoir, or any other source of dirty water, turn the job over to a Hunter valve.

Our HPV’s unique filtering mechanism is flushed with turbulent water every single time the valve opens and closes to ensure consistent, reliable operation. Its filter also works to eliminate valve failure, with an innovative design that protects the upper diaphragm chamber from debris.

DIMENSIONS

• Globe Valve: 5 1/4" H x 4 1/2" L x 2 3/4" W
  (13 cm H x 11 cm L x 7 cm W)
• Female inlet/outlet: 1" NPT, BSP, or Slip

OPERATING SPECIFICATIONS

• Flow: .4 to 40 GPM (0.09 to 9.1 m3/hr; 1.5 to 151 l/min)
• Pressure: 20 to 150 PSI (1.4 to 10.3 bars; 138 to 1034 kPa)
• Ambient temperature: up to 150˚F (66˚C)
• Heavy-duty solenoid: 24VAC, 370mA inrush current, 190mA holding current, 60 cycles; 475mA inrush current, 230mA holding current, 50 cycles

Models

• HPV-100G – 1" plastic globe valve, (F x F)
• HPV-101G – 1" plastic globe valve, with flow control (F x F)
• HPV-100G-S – 1" plastic globe valve (S x S)
• HPV-101G-S – 1" plastic globe valve, with flow control (S x S)

HPV Information Guide
(PDF: 97 KB)