Blazing Products Large Wire Connectors, Model # LV9500. (Sold in bags of 12)
Snap-Locking Waterproof Connectors with Pre-Filled Silicone
(Formerly known as SNAPLOC™ Low-Voltage Wire Connectors.)
- Best low-voltage connections for landscape lighting, irrigation & more...
- 100% Waterproof
- Quick, compact and easy!
Blazing Wire Connectors are the low-voltage wire connectors designed for the professional irrigation and landscape lighting contractor. Unlike twist-on connectors, you never have to doubt the connection.
Superior Performance When it Counts
- Lawn Irrigation Systems
- Low-Voltage Landscape Lighting
- Security Systems
- Telephone Wire Splices
- Boats, Recreational Vehicles
- Heavy Construction Equipment
Snap-Locking connectors eliminate common install problems:
Locking - Never loosens or dangles off wires
Foolproof - Never fails to grab the wires
Easy - Compact 5-second installation
No Mess - Silicone encapsulates connection and will not melt out
No Tunneling Effect - No channel for moisture to follow into the connection
Vibration Proof - Connection stays secure
Locks Tight with Double O-Ring Seals
Just squeeze and lock to hydraulically pump and pack waterproofing silicone. Pre-filled silicone fully encapsulates all bare wires, closing all entryways against moisture and corrosion. A double O-ring seal bars water from creeping in, and latches lock the connector around the wires. Blazing Wire Connectors™ are vibration-proof and never dangle off the wires.
Say Goodbye to Traditional Connector Problems
Are you familiar with the traditional problems of "waterproof" low-voltage wiring?
- When you go back to a valve box, do you find connectors dangling off the ends of the wires?
- When installing, do you twist and twist and the twist-on connectors still don't grab the wires?
- Do you regularly have to pull out the wires, removing the silicone with them?
- Do you overtwist and the wires break off inside?
- Do you have to turn your connector upside down so it doesn't collect water?
- Is it too messy if you ever have to get back into the connection?
Blazing Wire Connectors™ solve all of these problems with their patented design.
Eliminate Expensive Call-Backs Because of Faulty Wiring
Professionals generally check the wiring first when examining a faulty sprinkler system because traditional connectors regularly fail to maintain the connection and protect it from moisture and corrosion. Blazing Wire Connectors™ are the solution - They're the economical connectors that make the connection first and seal it second.
|
"A poor wire connection will always lead to an expensive and time-consuming call back. A call back takes time and money out of the contractor's pocket... Unlike ordinary twist-on wire connectors that traditionally cause gaps into which moisture can enter and accumulate, Snaploc wire connectors are 100-percent water resistant."
--Tech Times, Official quarterly of Irrigator Technical Training School, CA ("Snaploc...Innovation at Its Best!", Fall 2001)
|
|
The LV 9000 and LV 9500 wire connectors can be used with both solid and stranded wires.
|
Blazing Wire Connectors™ applications include:
- Lawn Irrigation Systems
- Low-Voltage Landscape Lighting
- Security Systems
- Telephone Wire Splices
- Boats, Recreational Vehicles
- Heavy Construction Equipment
LV 9000 / 901-8 (small)
- WIRE SIZES: Minimum 2 #24 gauge wires; Maximum 5 #18
- APPLICATION: Maximum 30 Volts / 10 Amps. Copper and/or aluminum wire, solid or stranded
- SEALANT TEMPERATURE: -40°F to 400°F
- WARNING! Not for high-voltage connections.
LV 9500 / 951-4 (large)
Designed specifically for landscape lighting, golf courses, and larger irrigation wiring.
- WIRE SIZES: Minimum 2 #18 gauge wires; Maximum 3 #10 & 1 #18
- APPLICATION: Maximum 30 Volts Copper and/or aluminum wire, solid or stranded
- SEALANT TEMPERATURE: -40°F to 400°F
- WARNING! Not for high-voltage connections.
|
