Rain Bird XFD-09-18-100 On-Surface Landscape Dripline 0.9 gph @ 18 Inch Spacing (100 ft. Roll) - 17mm

Replaces LD0918-100 Dripline

• The most flexible, pressure-compensating inline emitter tubing available to irrigate ground cover, dense plantings, hedge rows and more.

   

• Extra flexible tubing for fast, easy installation.

   

• Dual-layered tubing (brown over black or purple over black) provides unmatched resistance to chemicals, UV damage and algae growth.

   

• Patent pending emitter design provides for increased reliability.

   

• Longer lateral runs than competition
  

   

  Features and Benefits:

   

  • Unique material offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation.
  • Choice of flow rates, spacing and coil lengths provides design flexibility for a variety of non-turfgrass applications.
  • Accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Insert Fittings and 17mm insert fittings.
  • Use an Air/Vacuum Relief Valve Kit when installation is below soil.
  • The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi.
  • Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage.

  
  Specifications:

  • Pressure: 8.5 to 60 psi (0.7 to 4.1 bar)
  • Flow rates: 0.6 gph and 0.9 gph (2.3 l/h and 3.5 l/h)
  • Temperature: Up to 100° F (43.3 C) water; up to 125 F (51.7° C) ambient
  • Required filtration: 120 mesh
  • Outside diameter: 0.634" (16.1 mm)
  • Inside diameter: 0.536" (13.6 mm)
  • Wall thickness: 0.049" (1.2 mm)
  • Spacing: 12", 18" or 24"
  • Lengths: 100', 250', and 500' coils
  • Use with XF Dripline Insert Fittings, Easy Fit Compression Fittings, and 17mm Insert Fittings.