Rainbird 100DVF 1" Plastic Control Valve w/Flow Control (FxF)
100DVF 1" Sprinkler Control Valve With Flow Control
Female x Female (FxF) Threaded Configuration
Primary Applications:
Economical irrigation valve for residential and light commercial applications where flow control is desired.Features and Benefits:
- Double-filtered pilot-flow design for maximum reliability.
- Balanced-pressure diaphragm for long life.
- External bleed to manually flush system of dirt and debris during installation and system start-up.
- Internal bleed for spray-free manual operation.
- Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter.
- Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
- Operates in low-flow and Xerigation (drip) applications when the RBY filter is installed upstream.
- 1.25" (3,2 cm) stainless steel phillips head screws.
- Accepts latching solenoid for use with Rain Bird battery-operated controllers (TBOS System).
- Quick and convenient assembly with Rain Bird's MS-DV/DVF Valve Union Manifold kits.
- Unique, easy-to-turn patented pressure assisted flow control mechanism.
- Available as:
- 1" (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations
- 1" (26/34) Angle (A) configurations for flexible installations especially when submains are deep
- 1" (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding
- 1" (26/34) Male-by-Barb (MB) and 1" Male-by-1.25" Barb male thread inlet by barb outlet configuration for installation with poly pipe.
Click To Enlarge
Models:
- 100-DVF: 1" (26/34)
- 100-DVF-SS: 1" (26/34)
- 100-DVF-A: 1" (26/34)
- 100-DVF-MM: 1" (26/34)
- 100-DVF-MB: 1" (26/34)
- 100-DVF-UU: 1" (26/34)
- 100-DVF-UB: 1" (26/34)
Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec. (2,3 m/s) in order to reduce the effects of water hammer.
Specifications:
- Pressure: 15 to 150 psi (1,0 to 10,4 bar)
- 100-DVF Flow (non-union): 0.2 to 40 gpm (0,75 m3/h; 0,21 l/s); for flows below 3 gpm or any Xerigation application, use RBY-100-200MX Filter installed upstream.
- Temperature: Up to 110° F (43° C)
- Ambient air temperature: Up to 125° F (52° C)
- 24 VAC 50/60 Hz (cycles per second) solenoid power requirement
- 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current
- Solenoid coil resistance: 38 Ohms
Dimensions:
- Height: 5 3/5" (14,2 cm)
- Height (Angle): 5 1/2" (14 cm)
- Width: 3 1/3" (8,4 cm)
- Length: 4 3/8" (11,1 cm)
- Length (Angle): 3 3/4" (9,5 cm)
- Length (MM): 5 3/8" (13,6 cm)
- Length (MB): 5 3/4" (14,6 cm)
- Length (UU): 5 7/8" (14,9 cm)
- Length (UB): 6" (15,2 cm)
Additional Information:
Technical Specifications
|
|||
Voting |
|||
|
|||
There have been no reviews for this product. |
|||
Add your review here |
|||
