Home :: Irrigation :: Sprinkler Controllers :: Hunter Sprinkler Controllers :: Hunter I-Core Controllers :: Hunter ICM-600 6-Station plug-in expansion module (for IC-600 Series Controllers)

Hunter ICM-600 6-Station plug-in expansion module (for IC-600 Series Controllers)

Hunter ICM-600 6-Station plug-in expansion module (for IC-600 Series Controllers)
Quantity Our Low Price
2-4 Items $55.25
5-24 Items $54.38
25+ Items $51.88
*
Note:
 
(0 reviews)  

SKU
ICM-600
Retail price:
$75.00
Our price:
$56.99
 
Qty

Hunter ICM-600 6-Station plug-in expansion module (for IC-600 Series Controllers)

Module Only - Used as an add-on to your existing controller.

ICC modules consist of four or eight stations each; allowing you to build a controller more closely matching the total number of stations desired.

The IC controller is supplied with one factory-installed station module for up to 8 stations. Additional modules are purchased separately. Additional modules may be added in increments of 4 or 8 stations to expand the controller's station capability (maximum of 30 stations with plastic cabinet and maximum of 42 stations with metal or stainless steel cabinet).

ICM modules now have a Positive-Lock™ feature that fastens the module securely into the ICC (The Positive-Lock feature was added to ICM modules date coded 12/02 or newer - the modules will also work with older ICC units). Rotating the Positive-Lock lever makes it easy to lock or unlock the module(s). Follow these simple steps:

 

  1. When installing additional modules, you will need to turn AC power off at the controller.
  2. Rotate the Positive-Lock lever on the module clockwise to the unlock position.
  3. The module needs to be inserted into the next sequential position in the back of the controller. Note: If you are using a 4-station module, it must be in the last sequential position on the controller. Example: For an area that needs 12 stations, the first module will be an 8-station and the 4-station module will be below it. Note that station numbers are identified on the back panel, not the individual modules.
  4. Insert the module into the controller’s expansion slot with the tab end first (opposite side with the Positive-Lock lever).
  5. Push the module into the expansion slot and rotate the lever counter-clockwise (until the lever is flush with the side the module) to lock the module in place.
  6. Restore power to the controller. Turning the power off and on again permits the microprocessor to recognize the newly installed modules. You can also use the reset button on the back of the front panel to reset the microprocessor to recognize additional modules.

 

For use with Hunter IC-600PL, IC-600M and IC-600SS controllers only.

: *
: *
: *
Type the characters you see in the picture:


*
Rainbird ESP-4Mi 4 Station Indoor Sprinkler Controller
Rainbird ESP-4Mi 4 Station Indoor Sprinkler Controller
$94.99
TORO 570 Series Sprinkler Nozzle 0 - 360 - 12' Variable Arc
TORO 570 Series Sprinkler Nozzle 0 - 360 - 12' Variable Arc
$1.49
Rain Bird Xeri-Bug Emitters XB-20PC - Point Source Emission Devices
Rain Bird Xeri-Bug Emitters XB-20PC - Point Source Emission Devices
$0.49
Rain Bird XS-360 Xeri Sprays - Full-Circle Stream Spray
Rain Bird XS-360 Xeri Sprays - Full-Circle Stream Spray
$1.49
Hunter WVC-100 - 1-station Wireless Valve Controller (Solenoid Sold Separately)
$135.99
Hunter PCB-50 Bubbler Nozzles (.5 GPM)
Hunter PCB-50 Bubbler Nozzles (.5 GPM)
$2.99
Hunter G90 052830 Snap Ring Lower (White)
Hunter G90 052830 Snap Ring Lower (White)
$2.99
Rain Bird XQF1018100 1 in. Dripline Header 18 in. Spacing 100 ft Coil
Rain Bird XQF1018100 1 in. Dripline Header 18 in. Spacing 100 ft Coil
$245.99
There have been no reviews

Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!